KFR130N - 21000071

Radius trimmer, for trimming edges of PVC and veneer. Equipped with a bit of r=3 mm with bearing. Optional bits are also available for several different radius. It allows to trimm the four sides of the board at once. Powerful motor (750 W) and electronic speed adjustmnet. Also equipped with electronic control maintaining the speed constant, independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 & 30 mm) for using with bits of different diameters.

view details

DF550 Vario - 21000031

Grooving machine specially designed for slotting wooden doors and windows, for installation of silicon insulating joints. Equipped with double point 3 mm. bit, two interchangeable bases, lateral fence, dust collector pipe and carrying case.

£452.00

view details

Z81 - 21102451

Light weight designed for several kind of jobs. Provides excellent finishing on laminate trimming. Very usefull for making mouldings, working with a high stability and precission. Ideal for making recesses for placing hinges with the Virutex special templates. Its big power allows it to make rabbets on doors or windows with the specific optional bit. Possibility to make right or circular slots in an easy and precise way with only the accessories included as standard equipment. The Z81 is equipped with a powerful motor and an electronic speed control, for adjusting the speed constant independently to the working load.

£300.00

view details

UC16K - 92103707

UC16K is designed for making frontal and lateral recesses for any kind of lock on doors and frames. Designed for use with Router FR66F , it is especially recommended for making recesses for locks that open with magnetic anti-panic cards and special opening devices. Its exclusive attachment system by means of clamp vises enables the user to mortise doors that have already been hung without damaging the surface. Secure, reliable grip. Works horizontally also. UC16K includes a height bar, making possible identical recesses on several doors at the same height, with no need to readjust the lock mortising template holder.

view details

FR98H - 210000000

Designed for shaping the edges of longitudinal beams and crossbeams and modelling coffered ceilings. Factory-fitted with straight blades for bevel-edging, ti also permits rounding or moulding of shapes by using the moulding blades included with the equipment or the optional blades set. The width of the straight or moulded profile obtained can be set between 0 and 40 mm. The guide on which the piece to be shaped rests can be moved with respect to the cutter, which means that different profiles can be made on an edge, according to the zone of the blade on which work is being done. There are two handles, one parallel to the main grip and at the same level, permitting comfortable work on longitudinal beams and vertical parts, and a top knob with two optional positions for work on horizontal surfaces, thus in both cases allowing a perfectly comfortable and secure two-handed grip on the machine. The machine is equipped with a smooth electronic starting system and safety connection cutt-off switch to avoid undesired start-up. It is also equipped with a dust collection nozzle.

£445.00

view details

FR66F - 21103652

Router for wood and plastic materials. High precision and stability when routing. Full control of the machine without releasing the handle. Rapid depth adjustment with three positions. Its powerful 1,100 W motor makes it specially suitable for hard, continuous jobs. Ideal for roughfacing edges, cutting knots, copy milling, dovetail assemblies (PL11 dovetailing attachment), making recesses for carpentry hardware, etc... Equipped with external dust collection connector.

view details

FR117N - 21000026

Specially designed for trimming on the corners on the polishing of solid wood parquet or stairs. It allows to trim the corners, where the traditional parquet sanders cannot arrive, leaving them at same level than the rest of the floor. Machine equipped with frontal protector avoiding damages to the skirting or any other wall elements. Includes a dust collection nozzle for connecting to an external dust collector.

£420.00

view details

CR94D - 21000032

This trimmer is specially designed for slotting doors and windows. Allows insulating joints to be placed without removing the fittings. Ideal for fitting WEGOMA PVC and rubber joints.

£305.00

view details

OF850 - 21103631

Surface routers for routing wood and plastic. Ideal for deburring edges, cutting out knots, copy routing, trimming, constructing frames and tooling, etc. Equipped with external dust collection connector. High precision and stability during routing

view details

OF850E - 21109651

Surface routers for routing wood and plastic. Ideal for deburring edges, cutting out knots, copy routing, trimming, constructing frames and tooling, etc. Equipped with external dust collection connector. Includes electronic speed control. High precision and stability during routing

view details

KFR130N - 21000021

Radius trimmer, for trimming edges of PVC and veneer. Equipped with a bit of r=3 mm with bearing. Optional bits are also available for several different radius. It allows to trimm the four sides of the board at once. Powerful motor (750 W) and electronic speed adjustmnet. Also equipped with electronic control maintaining the speed constant, independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 & 30 mm) for using with bits of different diameters.

£300.00

view details

FC16S - 21000004

Specially designed for quick, precise mortising on doors or other elements, either at the work site or in the workshop. Its special fixing system allows the mortising of doors that have already been hung, without damaging the surface. Its quick measurement adjustment permits multiple mortises to be made in record time. Also able to work horizontally. For mortising grooved doors or those with overlap, there is an adjustment system to centre the machine. Optional bits are lowcost and easily inter-changeable, as they use the same tool-holding shaft. Equipped from factory with hard metal lock mortiser bit Ø 15 mm, locking bar to make mortises on several doors at the same height, rubber protectors for delicate jobs, service keys and dust collector connection.

£860.00

view details